| 13 FOOT COAXIAL CABLE
STANDARD HAND UNIT
MAXIMUM VOLTAGE 115 VAC
MAXIMUM CURRENT 18 AMPS
FREQUENCY 27.12 M.C.
RADIO FREQUENCY
CERTIFICATE ATTACHED
PENETRATES 2 INCHES OF WOOD
DESIGNED FOR FACTORY PRODUCTION
MODEL 4000 is the heavy duty "Production Model", and is used in Furniture factories, Window manufacturing, Cabinet shops and production line work where the machine will be used hard all day long.
Sets water base glues in seconds. Bonds wood, plastic and all non-metallic parts in 5-8 seconds. Clamp up your project, spot weld between clamps then release clamps. Welded area is equal to a 30 minute set.
WorkRite designed the Model 4000 Electronic Welder to do the heavy duty production work in the large factories, where speed and continuous use is a major factor.
Heavy duty electronic tubes power this large model and deliver a large amount of high frequency current to the glue line.
All component parts in the Model 4000 are of rugged design and will give long and very satisfactory service. Most powerful welder for its price on the market.
Recommended Glues:
-
Franklin Glue Company
-
Multibond - Titebond II
-
National Adhesives
-
Kor - Lok
-
Urea Resin Types
The glues listed above are but a few of the many types that may be used with success. It may be stated that any Urea or Resorcinol Resin should give satisfactory results, as will cross-link polyvinyl adhesives.
Some glues of the type mentioned above require a high pressure while others require only minimal pressure. If a glue problem arises it is best to contact your local adhesive representative and they will answer your questions.
Remember that overheating any glue will make it become less strong. Never weld longer than 10 seconds maximum time.
Polyvinyl resins, and ready mixed white glue, can be used under certain conditions. Your project should remain clamped under strong pressure until the joint cools. It will cool in about 2 minutes.
***This Item Ships Truckline. Shipping cost is a estimated value. We will follow-up with a actually cost.*** |
